• 状态
  • 已锁定 已锁定
  • 个回复 5 个回复
  • 名订阅用户 3 名订阅用户
  • 次查看 426 次查看
  • 用户 0 名在线用户
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TRPGP40ATGC: TRPGP40ATGC third-party device not recognized

wu yan
Prodigy 10 points
Part Number: TRPGP40ATGC
Other Parts Discussed in Thread: MRD2EVM, RI-TRP-DR2B

How to obtain more detailed information about TRPGP40ATGC? I used MRD2EVM to write the animal label type, but it cannot be recognized using third-party devices according to the protocol of ISO11784/11785

  • 0
    TI__Mastermind 18380 points

    您好，   已经跟进您的问题，有更新会立即回复您，谢谢。

  • 0 回复 Alex Zhang
    TI__Mastermind 18380 points

    您能澄清一下到底什么是不能识别的吗？第三方阅读器是否无法识别 TRPGP40ATGC，或者 MRD2EVM 是否无法识别第三方应答器？无论如何，您知道第三方设备类型吗？

    could you please clarify what exactly can not be recognized? Is the TRPGP40ATGC not recognized by a third party reader or is the MRD2EVM not recognizing a third party transponder? In any case, do you know the third party device type? Please let me now.

  • 0 回复 Alex Zhang
    Prodigy 10 points

    The third-party device is a standard device used in animal husbandry, supporting 11784/11785HDX, MRD2EVM can read and write TRPGP40ATGC, and the third-party device I have can read RI-TRP-DR2B and other chips compatible with 11784/11785HDX. You did not provide a detailed datasheet. With a datasheet, we can provide more documentation to troubleshoot the issue. This issue may be my configuration issue, but I don't know how to configure it!

  • 0 回复 wu yan
    TI__Mastermind 18380 points

    您好，   已经跟进您的问题，有更新会立即回复您，谢谢。

  • 0 回复 Alex Zhang
    TI__Mastermind 18380 points

    这个TRPGP40ATGC应答器的配置似乎不完整。

    需要对符合 ISO11785 的 AID 进行编程，然后在 MRD2 GUI 中设置锁定。

    只有这样，应答器才处于应用程序生命周期中，并且只能通过第三方阅读器读取收费才能做出响应。

    还有 TRPGR30ATGC可用，它是只读应答器，不需要这些配置步骤。

    this TRPGP40ATGC transponder seems to have an incomplete configuration.

    It is required to program an ISO11785 compliant AID, followed by setting the Lock in the MRD2 GUI.

    Only then the transponder is in Application Lifecycle and can respond at a charge only read with the third party reader.

    There is also the TRPGR30ATGC available, which is a read-only transponder and does not require these configuration steps.