用smart RF studio识别CC2640R2L芯片,识别出来是CC2650,点进去设置好参数后控制发包在频谱仪上一点反应没有;
同样的用CC2640芯片进行同样的操作,在频谱仪上就可以看到发出来的信号;
请问是CC2650这个芯片哪里操作的不对么,导致软件不能控制发包。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.