CC1312R: 如何解决UART和RF的阻塞问题

J M

Part Number: CC1312R

Dear TI：

功能说明：CC1312要实现通过串口读取数据并响应输出，使用readCallback函数来实现读取中断，在函数中执行UART_read(handle, recv_buf, wantedRxBytes);函数来获取下一次数据。

然后另一个线程实现RF射频来接受信息。

出现的问题：在串口读取一次之后，只能接受一次RF的信息，当下一次串口执行一次之后又可以接受一次信息，猜想是UART_read(）函数阻塞了RF的进程。这种情况怎么办？怎么让两者互相独立？

Thanks。

4 年多前

0 Kevin Qiu 4 年多前

TI__Guru* 82220 points

看现象可能是阻塞了，回调函数中不能有任何形式的阻塞，将UART_read(）从回调函数中拿出来，尝试使用信号量

0 J M 4 年多前

您好，尝试去使用信号量去试验，

RF部分代码逻辑如下：

while(1) {
        // Wait to receive a packet
        EasyLink_receiveAsync(echoRxDoneCb, 0);

        /* Wait indefinitely for Rx */
        Semaphore_pend(echoDoneSem, BIOS_WAIT_FOREVER);
    }

此处的信号量实现等待RX信号，当接收完成后post信号量。

串口部分由原来的在readcallback函数中调用uart_read函数改成Semaphore_post(echoDoneSem);

static void readCallback(UART_Handle handle, void *recv_buf, size_t size)
{
    uart = handle;
    if(size == 8)
    {
        memset(mdcmd_buf, 0, MAX_BUF_SIZE);
        memcpy(mdcmd_buf,recv_buf,size);
        UART_control(handle,(UART_CMD_RESERVED + 2),NULL);//清除uart_read中的buffer
        Modbus_flag = true;
        memset(recv_buf, 0, MAX_BUF_SIZE);

        Semaphore_post(echoDoneSem);
        //UART_read(handle, recv_buf, wantedRxBytes);
    }
    else//同时收到多条指令或着不是正确指令时
    {
        UART_control(handle,(UART_CMD_RESERVED + 2),NULL);//清除uart_read中的buffer
        memset(recv_buf, 0, MAX_BUF_SIZE);
        
        Semaphore_post(echoDoneSem);
        //UART_read(handle, recv_buf, wantedRxBytes);
    }
    MD_wdg_flag = true;
}

然后在UART执行逻辑中将UART_read函数放到while循环中，并用Semaphore_pend去阻塞。如下：

    while(1)
    {
        UART_read(uart, recv_buf, wantedRxBytes);
        Semaphore_pend(echoDoneSem, BIOS_WAIT_FOREVER);
        if(Modbus_flag)
        {
        func_unpackage(&mdcmd_buf[0], 8);                   //执行Modbus指令
        chargeBaudFun();                                    //波特率是否变更
        Modbus_flag = false;
        }
    }

如此操作不知道是不是您之前的意思，我的想法是，在阻塞的时候当RF或者readcallback有响应时执行完释放echoDoneSem，然后继续等待RF和UART。

实验的结果是，RF和UART都不工作，不知道是不是信号量的使用逻辑不对。

请帮忙查看一下。

0 J M 4 年多前回复 Kevin Qiu

我尝试将read放外面，然后将RF部分注释掉，UART可以正常使用，通过信号量来等待串口信息。

如果使用同一个信号量是不是还是会出现阻塞的问题？相当于没解决问题是吗？

+1 Kevin Qiu 4 年多前回复 J M

TI__Guru* 82220 points

参考RF类似的示例逻辑：

static void rxTaskFunction(UArg arg0, UArg arg1)
{
    /* Init UART */
    const char  startPrompt[] = "Opening UART and RF:\r\n";
    const char  packetRxPromt[] = "Packet received \r\n";
    UART_Handle uart;
    UART_Params uartParams;

    UART_init();

    /* Create a UART with data processing off. */
    UART_Params_init(&uartParams);
    uartParams.writeDataMode = UART_DATA_BINARY;
    uartParams.readDataMode = UART_DATA_BINARY;
    uartParams.readReturnMode = UART_RETURN_FULL;
    uartParams.readEcho = UART_ECHO_OFF;
    uartParams.baudRate = 115200;

    uart = UART_open(Board_UART0, &uartParams);

    if (uart == NULL) {
         /* UART_open() failed */
         while (1);
    }

    /* Init RF */

    RF_Params rfParams;
    RF_Params_init(&rfParams);

    if( RFQueue_defineQueue(&dataQueue,
                            rxDataEntryBuffer,
                            sizeof(rxDataEntryBuffer),
                            NUM_DATA_ENTRIES,
                            MAX_LENGTH + NUM_APPENDED_BYTES))
    {
        /* Failed to allocate space for all data entries */
        while(1);
    }

    /* Modify CMD_PROP_RX command for application needs */
    RF_cmdPropRx.pQueue = &dataQueue;           /* Set the Data Entity queue for received data */
    RF_cmdPropRx.rxConf.bAutoFlushIgnored = 1;  /* Discard ignored packets from Rx queue */
    RF_cmdPropRx.rxConf.bAutoFlushCrcErr = 1;   /* Discard packets with CRC error from Rx queue */
    RF_cmdPropRx.maxPktLen = MAX_LENGTH;        /* Implement packet length filtering to avoid PROP_ERROR_RXBUF */
    RF_cmdPropRx.pktConf.bRepeatOk = 1;
    RF_cmdPropRx.pktConf.bRepeatNok = 1;

    /* Request access to the radio */
    rfHandle = RF_open(&rfObject, &RF_prop, (RF_RadioSetup*)&RF_cmdPropRadioDivSetup, &rfParams);

    /* Set the frequency */
    RF_postCmd(rfHandle, (RF_Op*)&RF_cmdFs, RF_PriorityNormal, NULL, 0);

    /* Write to the UART before starting RX */
    UART_write(uart, startPrompt, sizeof(startPrompt));

    /* Enter RX mode and stay forever in RX */
    RF_EventMask terminationReason = RF_postCmd(rfHandle, (RF_Op*)&RF_cmdPropRx,
                                               RF_PriorityNormal, &callback, 
                                               RF_EventRxEntryDone);

    while(1)
    {
        /* Waiting for packet */
        Semaphore_pend(semHandle, BIOS_WAIT_FOREVER);
        /* Writing packet to UART */
        UART_write(uart, &packet, packetLength);
    };
}

void callback(RF_Handle h, RF_CmdHandle ch, RF_EventMask e)
{
    if (e & RF_EventRxEntryDone)
    {
        /* Toggle pin to indicate RX */
        PIN_setOutputValue(pinHandle, Board_PIN_LED2,!PIN_getOutputValue(Board_PIN_LED2));

        /* Get current unhandled data entry */
        currentDataEntry = RFQueue_getDataEntry();

        /* Handle the packet data, located at &currentDataEntry->data:
         * - Length is the first byte with the current configuration
         * - Data starts from the second byte */
        packetLength      = *(uint8_t*)(&currentDataEntry->data);
        packetDataPointer = (uint8_t*)(&currentDataEntry->data + 1);

        /* Copy the payload + the status byte to the packet variable */
        memcpy(packet, packetDataPointer, (packetLength + 1));

        RFQueue_nextEntry();

        /* Packet received */
        Semaphore_post(semHandle);

    }
}

/*
 *  ======== main ========
 */
int main(void)
{
    Semaphore_Params semParams;
    /* Construct a Semaphore object to be use as a resource lock, inital count 1 */
    Semaphore_Params_init(&semParams);
    Semaphore_construct(&semStruct, 0, &semParams);
    /* Obtain instance handle */
    semHandle = Semaphore_handle(&semStruct);

    /* Call driver init functions. */
    Board_initGeneral();

    /* Open LED pins */
    ledPinHandle = PIN_open(&ledPinState, pinTable);
    Assert_isTrue(ledPinHandle != NULL, NULL);

    /* Initialize task */
    RxTask_init(ledPinHandle);

    /* Start BIOS */
    BIOS_start();

    return (0);
}

+1 J M 4 年多前回复 Kevin Qiu

您好，刚才我尝试了下将RF里面的Semaphore_handle去掉了，在UART_read那边加Semaphore_handle，这样能解决我的问题了。感谢帮忙

0 Kevin Qiu 4 年多前回复 J M

TI__Guru* 82220 points

不客气

低于 1GHz

低于 1GHz 论坛

CC1312R: 如何解决UART和RF的阻塞问题