This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我的基于cc2530的压力传感器，没有前端放大器，请问在协议栈的设置里面是不是只要在hal_board_cfg.h中把#define HAL_PA_LNA 改为 #define xHAL_PA_LNA 以及 #define xHAL_PA_LNA_CC2590 1就可以了，还有没有其他地方要改？
是的 基本不需要修改
