Other Parts Discussed in Thread: TLV3501
我用TLV3501搭了一个过零比较器,原理图是参照芯片手册上的电路图,5V供电,输入3.3Vpp的方波,但是输出只能达到2Vpp左右,如果想得到5Vpp的输出,应该怎么改呢?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Other Parts Discussed in Thread: TLV3501
我用TLV3501搭了一个过零比较器,原理图是参照芯片手册上的电路图,5V供电,输入3.3Vpp的方波,但是输出只能达到2Vpp左右,如果想得到5Vpp的输出,应该怎么改呢?
TLV3501的输出swing距电源轨一般也就30mV左右,所以即使不能绝对到5Vpp,在4.9Vpp差不多,能把你的电路发上来看下吗?
单电源供电是做不了过零比较,需要双电源供电。还有建议增加一个小的迟滞电压,频率不宜非常高。