This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我在TINA里仿真的时候用TLV2460作前置放大，请问EN引脚如何接？
EN引脚应该就是手册里的~SHDN引脚。从手册27页的信息来看，如果想把运放关断，则需把~SHDN连到最低电平：单电源供电时连到GND，双电源供电时连到VDD-。如果让运放正常工作，建议把~SHDN连接到高电平，即VDD+。
