我按照推荐电路设计了板子,输出不对,好像输入都不是一个交流正弦,然后我用Tina仿真,输出好像也不对,但在两个隔离的地间加电源,就会有正确的波形,希望能帮我解释下现象,现在需要采样交流电流,但是做不出来,具体的见wordamc1301.docx
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我按照推荐电路设计了板子,输出不对,好像输入都不是一个交流正弦,然后我用Tina仿真,输出好像也不对,但在两个隔离的地间加电源,就会有正确的波形,希望能帮我解释下现象,现在需要采样交流电流,但是做不出来,具体的见wordamc1301.docx
您好,
在TI提供的AMC1301 TINA-TI Reference Design (Rev. A)中也加了一个Vhv - Barrier High Voltage,我的理解是在使用amc1301
*** 模型时应该是需要给隔离放大器输入输出间提供一个共模电压,才能正常工作。
TI AMC1301 TINA-TI仿真参考设计下载网址:www.ti.com/.../toolssoftware