本人用TIA对一个APD进行放大,使用OPA855放大器,但该APD的终端电容过大且信号带宽过高,导致输出信号只有50uv左右。
我想将其放大到至少100mv左右,请问有什么推荐的放大器或者典型电路,十分感谢。附件是我的电路仿真。Noname.TSC
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
本人用TIA对一个APD进行放大,使用OPA855放大器,但该APD的终端电容过大且信号带宽过高,导致输出信号只有50uv左右。
我想将其放大到至少100mv左右,请问有什么推荐的放大器或者典型电路,十分感谢。附件是我的电路仿真。Noname.TSC
您类似的问题在E2E英文论坛已有工程师跟进,请继续关注。
https://e2e.ti.com/support/amplifiers/f/14/t/907988
你好,我的apd电流是932nA,我用opa855把它放大到了50uv,我想把它进行进一步放大,请问如何实现这个功能。
你好,我现在的输出为5mv,信号带宽是70~88MHz。我现在想要将其放大到500mv,请问现在有什么推荐的放大器或典型电路。