INA114: Why there is a notch on the top of the IC, while the one I bought is with a dot on the IC?

Mans Lin

Part Number: INA114

Dear All,

I bought a INA114APm which should be with a notch like this:

However, the one I received is:

Is this a design change or I am fooled by others?

2 年多前

0 Amy Luo 2 年多前

TI__Guru**** 185470 points

Hi Mans,

There are multiple molding tools used for imprinting the Pin 1 identifier and different units go through different molding tools. Hence, it is expected to have different sized / appearance Pin 1 identifiers on different units, even in the ones with the same Lot Trace Code (LTC) and the ones in the same tape.

In terms of authenticity, we generally recommend confirming that the source of the product is TI, and we do not recommend judging from the silkscreen, appearance, etc. because other pirated IC manufacturers can imitate it.

Thanks,

Amy

0 Mans Lin 2 年多前回复 Amy Luo

Hi Amy,

Thank you so much for the reply. Noted with thanks.

Hope you have a good weekend in advnace!!!

Mans

0 Amy Luo 2 年多前回复 Mans Lin

TI__Guru**** 185470 points

It's nothing, don't mention it.

Thanks for your wishes.

放大器

放大器论坛

INA114: Why there is a notch on the top of the IC, while the one I bought is with a dot on the IC?