基于XAWR2243P的级联版，在mmwave_studio中运行lua无法采集数据

user6105535 说：

级联雷达版基本配置成功

请问你是如何配置的？使用Cascade_Configuration_MIMO.lua，修改DFP为AWR2243的？

您好，我是使用‘Cascade_Configuration_Basic.lua’ 或者 ‘Cascade_Configuration_TestSource.lua’ 配置的，没有报错，确定DFP是2243的。

Cascade_Configuration_TestSource.lua’ +'Cascade_capture.lua' output log:

LuaLoad("C:/ti/mmwave_studio_02_01_01_00/mmWaveStudio/Scripts/Cascade/Cascade_Configuration_TestSource.lua")
[11:29:50] Setting up Studio for Cascade started..
[11:29:50] [RadarAPI]: ar1.SelectCaptureDevice("TDA2XX")
[11:29:50] [RadarAPI]: Status: Passed
[11:29:50] [RadarAPI]: TDAStatusCallback Event Registered
[11:29:50] [RadarAPI]: registerTDAStatusCallback Status: Passed
[11:29:50] [RadarAPI]: ar1.ConnectTDA("192.168.33.180", 5001, 15)
[11:29:50] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:29:50] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_VERSION_INFO Async event recieved() with status 0. TDA Version : REL_VISION_SDK_03_07_01_00 Aug 5 2019 15:04:45[11:29:50] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:29:52] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:29:52] [RadarAPI]: ConnectTDACaptureCard Status: Passed
[11:29:52] TDA Capture Card Status : CONNECTED!
[11:29:52] ConnectTDA Successful
[11:29:52] selectCascadeMode Successful
[11:29:52] Setting up Studio for Cascade ended..
[11:29:52] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:29:52] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:29:53] [RadarAPI]: ar1.FullReset(1)
[11:29:53] [RadarAPI]: Status: Passed
[11:29:53] [RadarAPI]: ar1.SOPControl_mult(1,4)
[11:29:53] [RadarAPI]: Status: Passed
[11:29:53] Master : SOP Reset Successful
[11:29:53] [DeviceId-0] MSS CPU Fault error status Async event recieved(0x3, 0x0,0xFFFFE580, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[11:29:53] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)
[11:29:53] [RadarAPI]: Status: Passed
[11:29:53] [DeviceId-0] MSS power up done async event received!
[11:29:53] Master : SPI Connection Successful
[11:29:53] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(1, C:\\ti\\mmwave_dfp_02_01_05_03\\firmware\\xwr22xx_metaImage.bin)
[11:29:53] [DeviceId-0] MSS ESM Fault error status Async event recieved(0x0, 0x2000000)
[11:30:13] Master : FW Download Successful
[11:30:13] Device Status : UnDetDe/ASIL-B/SOP:4/ES:1
[11:30:13] [RadarAPI]: ar1.RfEnable_mult(1)
[11:30:13] [RadarAPI]: Status: Passed
[11:30:13] [DeviceId-0] BSS power up done async event received!
[11:30:14] Master : RF Power Up Successful
[11:30:14] [RadarAPI]: ar1.ChanNAdcConfig_mult(1, 1, 1, 1, 1, 1, 1, 1, 2, 1, 0, 1)
[11:30:14] [RadarAPI]: Status: Passed
[11:30:14] Master : Channel & ADC Configuration Successful
[11:30:14] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:30:15] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:30:15] [RadarAPI]: ar1.FullReset(2)
[11:30:15] [RadarAPI]: Status: Passed
[11:30:15] [RadarAPI]: ar1.SOPControl_mult(2,4)
[11:30:15] [RadarAPI]: Status: Passed
[11:30:15] Device 2 : SOP Reset Successful
[11:30:15] [DeviceId-1] MSS CPU Fault error status Async event recieved(0x3, 0x0,0xFFFFE580, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[11:30:15] [RadarAPI]: ar1.AddDevice(2)
[11:30:15] [RadarAPI]: Status: Passed
[11:30:15] [DeviceId-1] MSS power up done async event received!
[11:30:15] Device 2 : SPI Connection Successful
[11:30:15] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:30:16] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:30:16] [RadarAPI]: ar1.FullReset(4)
[11:30:16] [RadarAPI]: Status: Passed
[11:30:16] [RadarAPI]: ar1.SOPControl_mult(4,4)
[11:30:16] [RadarAPI]: Status: Passed
[11:30:16] Device 3 : SOP Reset Successful
[11:30:16] [DeviceId-2] MSS CPU Fault error status Async event recieved(0x3, 0x0,0xFFFFE580, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[11:30:16] [RadarAPI]: ar1.AddDevice(4)
[11:30:16] [RadarAPI]: Status: Passed
[11:30:16] [DeviceId-2] MSS power up done async event received!
[11:30:16] Device 3 : SPI Connection Successful
[11:30:16] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:30:17] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:30:17] [RadarAPI]: ar1.FullReset(8)
[11:30:17] [RadarAPI]: Status: Passed
[11:30:17] [RadarAPI]: ar1.SOPControl_mult(8,4)
[11:30:17] [RadarAPI]: Status: Passed
[11:30:17] Device 4 : SOP Reset Successful
[11:30:17] [DeviceId-3] MSS CPU Fault error status Async event recieved(0x3, 0x0,0xFFFFE580, 0x0,0x0, 0x0,0x0, 0xFFFF,0xFF, 0xFF,0xFF, 0xFF)
[11:30:17] [RadarAPI]: ar1.AddDevice(8)
[11:30:17] [RadarAPI]: Status: Passed
[11:30:17] [DeviceId-3] MSS power up done async event received!
[11:30:17] Device 4 : SPI Connection Successful
[11:30:17] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(14, C:\\ti\\mmwave_dfp_02_01_05_03\\firmware\\xwr22xx_metaImage.bin)
[11:30:17] [DeviceId-1] MSS ESM Fault error status Async event recieved(0x0, 0x2000000)
[11:30:17] [DeviceId-3] MSS ESM Fault error status Async event recieved(0x0, 0x2000000)
[11:30:40] Slaves : FW Download Successful
[11:30:40] Slave1 Device Status : UnDetDe/ASIL-B/SOP:4/ES:1
[11:30:40] Slave2 Device Status : UnDetDe/ASIL-B/SOP:4/ES:1
[11:30:40] Slave3 Device Status : UnDetDe/ASIL-B/SOP:4/ES:1
[11:30:40] [RadarAPI]: ar1.RfEnable_mult(14)
[11:30:40] [RadarAPI]: Status: Passed
[11:30:40] [DeviceId-3] BSS power up done async event received!
[11:30:40] [DeviceId-2] BSS power up done async event received!
[11:30:40] [DeviceId-1] BSS power up done async event received!
[11:30:43] Slaves : RF Power Up Successful
[11:30:43] [RadarAPI]: ar1.ChanNAdcConfig_mult(14, 1, 1, 1, 1, 1, 1, 1, 2, 1, 0, 2)
[11:30:43] [RadarAPI]: Status: Passed
[11:30:43] Slaves : Channel & ADC Configuration Successful
[11:30:43] [RadarAPI]: ar1.RfLdoBypassConfig_mult(15, 0xF)
[11:30:43] [RadarAPI]: Status: Passed
[11:30:43] LDO Bypass Successful
[11:30:43] [RadarAPI]: ar1.LPModConfig_mult(15, 0,0)
[11:30:43] [RadarAPI]: Status: Passed
[11:30:43] Low Power Mode Configuration Successful
[11:30:43] [RadarAPI]: ar1.SetMiscConfig_mult(15,1)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] Misc Control Configuration Successful
[11:30:44] [RadarAPI]: ar1.RfInitCalibConfig_mult(15, 1, 1, 1, 1, 1, 1, 1, 65537)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] RF Init Calibration Successful
[11:30:44] [RadarAPI]: ar1.RfInit_mult(15)
[11:30:44] [DeviceId-1] RF Init async event received!
[11:30:44] [DeviceId-0] RF Init async event received!
[11:30:44] [DeviceId-3] RF Init async event received!
[11:30:44] [RadarAPI]: Time stamp, Temperture: 3419,36; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 1, 1; RxIQMM Status, Update: 1, 1;
[11:30:44] [RadarAPI]: Time stamp, Temperture: 3419,36; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 1, 1; RxIQMM Status, Update: 1, 1;
[11:30:44] [RadarAPI]: Time stamp, Temperture: 3419,36; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 1, 1; RxIQMM Status, Update: 1, 1;
[11:30:44] [DeviceId-2] RF Init async event received!
[11:30:44] [RadarAPI]: Time stamp, Temperture: 3419,35; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 1, 1; RxIQMM Status, Update: 1, 1;
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] RF Init Successful
[11:30:44] [RadarAPI]: ar1.DataPathConfig_mult(15, 0, 1, 0)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] Data Path Configuration Successful
[11:30:44] [RadarAPI]: ar1.LvdsClkConfig_mult(15, 1,1)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] Clock Configuration Successful
[11:30:44] [RadarAPI]: ar1.CSI2LaneConfig_mult(15, 1, 0, 2, 0, 4, 0, 5,0,3,0)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] CSI2 Configuration Successful
[11:30:44] [RadarAPI]: ar1.SetTestSource_mult(1, 4, 3, 0, 0, 0, 0, -327, 0, -327, 327, 327, 327, -2.5, 327, 327, 0, 0, 0, 0, -327, 0, -327, 327, 327, 327, -95, 0, 0, 0.5, 0, 1, 0, 1.5, 0, 0, 0, 0, 0, 0,0)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] Device 1 : Test Source Configuration Successful
[11:30:44] [RadarAPI]: ar1.SetTestSource_mult(2, 3, 4, 0, 0, 0, 0, -327, 0, -327, 327, 327, 327, -2.5, 327, 327, 0, 0, 0, 0, -327, 0, -327, 327, 327, 327, -95, 0, 0, 0.5, 0, 1, 0, 1.5, 0, 0, 0, 0, 0, 0,0)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] Device 2 : Test Source Configuration Successful
[11:30:44] [RadarAPI]: ar1.SetTestSource_mult(4, 12, 5, 0, 0, 0, 0, -327, 0, -327, 327, 327, 327, -2.5, 327, 327, 0, 0, 0, 0, -327, 0, -327, 327, 327, 327, -95, 0, 0, 0.5, 0, 1, 0, 1.5, 0, 0, 0, 0, 0, 0,0)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] Device 3 : Test Source Configuration Successful
[11:30:44] [RadarAPI]: ar1.SetTestSource_mult(8, 5, 12, 0, 0, 0, 0, -327, 0, -327, 327, 327, 327, -2.5, 327, 327, 0, 0, 0, 0, -327, 0, -327, 327, 327, 327, -95, 0, 0, 0.5, 0, 1, 0, 1.5, 0, 0, 0, 0, 0, 0,0)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] Device 4 : Test Source Configuration Successful
[11:30:44] [RadarAPI]: ar1.ProfileConfig_mult(15, 0, 77, 5, 6, 40, 0, 0, 0, 0, 0, 0, 78.986, 0, 256, 8000, 0, 0, 48)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] Profile Configuration successful
[11:30:44] [RadarAPI]: ar1.ChirpConfig_mult(15, 0, 11, 0, 0, 0, 0, 0, 1, 1,0)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:44] Chirp 0 Configuration successful
[11:30:44] [RadarAPI]: ar1.EnableTestSource_mult(15,1)
[11:30:44] [RadarAPI]: Status: Passed
[11:30:45] Enabling Test Source Configuration successful
[11:30:45] Test Source Already Enabled...!!!
[11:30:45] [RadarAPI]: ar1.EnableTestSource_mult(1,1)
[11:30:45] [RadarAPI]: Status: Passed
[11:30:45] [RadarAPI]: ar1.FrameConfig_mult(1, 0, 11, 10, 64, 100, 0, 0, 1)
[11:30:45] [RadarAPI]: Status: Passed
[11:30:45] Master : Frame Configuration successful
[11:30:45] Test Source Already Enabled...!!!
[11:30:45] [RadarAPI]: ar1.EnableTestSource_mult(14,1)
[11:30:45] [RadarAPI]: Status: Passed
[11:30:45] [RadarAPI]: ar1.FrameConfig_mult(14, 0, 11, 10, 64, 100, 0, 0, 2)
[11:30:45] [RadarAPI]: Status: Passed
[11:30:45] Slaves : Frame Configuration successful
[11:30:45]
[11:30:45] ***Script completed successfully.***
[11:32:18] LuaLoad("C:/ti/mmwave_studio_02_01_01_00/mmWaveStudio/Scripts/Cascade/Cascade_Capture.lua")
[11:32:18] Loops Remaining : 1
[11:32:18] Starting TDA ARM...
[11:32:18] [RadarAPI]: ar1.TDACaptureCard_StartRecord_mult(1, 100, 0, ZYM_Capture, 128)
[11:32:18] Device 0 - Configuring TDA with Width : 2048 and Height : 768
[11:32:18] [RadarAPI]: Device 0 - setWidthAndHeight Status: Passed
[11:32:18] Device 1 - Configuring TDA with Width : 2048 and Height : 768
[11:32:18] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:32:18] [RadarAPI]: Device 1 - setWidthAndHeight Status: Passed
[11:32:18] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:32:18] Device 2 - Configuring TDA with Width : 2048 and Height : 768
[11:32:18] [RadarAPI]: Device 2 - setWidthAndHeight Status: Passed
[11:32:18] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:32:18] Device 3 - Configuring TDA with Width : 2048 and Height : 768
[11:32:18] [RadarAPI]: Device 3 - setWidthAndHeight Status: Passed
[11:32:18] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:32:18] Sending Frame Periodicity of 100 to TDA..
[11:32:18] [RadarAPI]: Status: Passed. Frame Periodicity sent to TDA
[11:32:18] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:32:18] Sending Capture Directory with name /mnt/ssd/ZYM_Capture to TDA..
[11:32:18] [RadarAPI]: Status: Passed. Capture Directory sent to TDA
[11:32:18] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:32:18] Sending File Allocation of 100 files to TDA..
[11:32:18] [RadarAPI]: Status: Passed. File Allocation sent to TDA
[11:32:18] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:32:18] Sending Enable Data Packaging (0 - 16-bit; 1 - 12-bit) with value of 0 to TDA..
[11:32:18] [RadarAPI]: Status: Passed. Enable Data Packaging sent to TDA
[11:32:18] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:32:18] Sending Number of frames to capture with value of 128 to TDA..
[11:32:18] [RadarAPI]: Status: Passed. Number of frames to capture sent to TDA
[11:32:18] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0
[11:32:19] [RadarAPI]: Status: Passed for notifying TDA about Creating Application
[11:32:28] Create Application Response from Capture Card timed out!!
[11:32:28] TDA ARM Failed
[11:32:28]
[11:32:28] ***Script completed successfully.***

ascade_Configuration_Basic.lua’ +TXBF的lua+'Cascade_capture.lua' 仍报错。[11:40:47] [RadarAPI]: Status: Passed. Frame Periodicity sent to TDA
[11:40:50] Frame Periodicity Response from Capture Card timed out!!
[11:40:50] TDA ARM Failed

没有修改EVM 的IP地址，用的是默认192.168.33.180地址。SSD格式化过程中，分区已有， 固件用的是sdimage_3_7_1.bin.

你好，

从log看的确没有看异常，除了最后的TDA2 超时相应的信息。

1. 请问你级联板使用的电源是12V5A么？
2. 你说你使用的sdimage_3_7_1.bin，请问是如何烧写到SD卡上的？文档里面建议使用的image是mmwave studio 2.1里sdimage_3_7_1.img.xz。
3. 请问你的电脑和板子是连着一个网络路由器上么？
4. 请问你使用的电脑是台式机么?
5. 请问你使用电脑的操作系统是什么?

1. 级联板使用的电源是台积电的12V5A电源适配器.
2. 使用的是mmwave studio 2.1里sdimage_3_7_1.img,通过balenaEtcher烧录的。
3. 电脑和板子是直接由网线连接的
4. 电脑是Dell笔记本电脑
5. 电脑的操作系统是win10.

你好，

发现你使用的mmwave_studio_02_01_01_00和我使用过的mmwave studio版本不同，你能尝试mmwave_studio_02_01_00_00么？最好是申请mmwave_studio for 2G，版本是3.x的。

改用C:\ti\mmwave_studio_02_01_00_00\mmWaveStudio\PlatformBinaries\TDA2Firmware\sdimage_3_7_1.img.xz烧录后，好像雷达板都连不上了，网口不闪灯了。报Not able to connect with the TDA board. Please check whether the Capture Card is connected to the network!

尝试mmwave_studio_02_01_00_00以后 问题仍存在~~

你好，

你可以连上usb口，看看串口打印是否正常。不正常的话，尝试重新烧写一下。

有好些客户都是用的这个版本的mmwave studio，采集是没有问题的。最好是申请mmwave_studio for 2G，版本是3.x的。
e2e.ti.com/.../901836

你好，

关于申请问题，请到下面网址寻找客服支持。
ticsc.service-now.com/csm