IWR6843 ES2.0 最大波特率

请参考下面的帖子，把mms_main.c里baud rate配置的参数改一下后重新编译烧写，mmWave Demo Visualizer里的波特率也要改成一样的。
e2e.ti.com/.../iwr1642boost-baud-rate-can-it-be-slowed-down
另外，还要注意下面的提示。
Note that the sensor should be in stopped or rebooted state for the changes to take effect. Visualizer communicates with the sensor over CLI port to configure it to the user provided baud rate in this dialog box.

helllo

已经这样测试过,mmwave demo visualizer 接收不到uart 数据，所以才在论坛上请教的,麻烦帮忙确认，谢谢.

Hello

yes,是对应的.