关于awr1642多发多收的问题

需要配置两个Chirps, chirp0给TX0, Chirp1给TX1，具体请看下面的配置

In order to do TDM MIMO, you need to configure two chirps,

1) the first chirp: profile ID = 0, start chirp = 0, end chirp ID = 0, enable TX0;

2) the second chirp: profile ID = 0 (same), start chirp = 1, end chip = 1, enable TX1.

Then in frame configuration, you will need to program start chirp = 0, and end chirp = 1.

In this way, you will be able to double the data size from the single TX case.

If you enable TX0 and TX1 in one chirp, you are enable TX1 and TX0 at the same time.

您好 能说一说在mmwave studio里的哪个位置设置的吗 没找到呢