This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM5142在硬件模式,做Slave时,输出无数据,测量VNEG脚电压是0.49V 感觉片子没有正常工作

Other Parts Discussed in Thread: PCM5142

PCM5142在硬件模式,做Slave时,输入SCK 是12.88M  BCK是768K   LRCLK是16K    数据位是24位,结果是 输出无数据.    测量VNEG脚电压是0.49V,手册介绍是-3.3V。感觉片子没有正常工作。硬件模式下是否不需要软件配置,直接就可以正常工作

附件为配置的原理图帮我看看是否有问题

PCM5142原理图.pdf