This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
TAS5630B只要上电ready引脚就置位为低电平（没有输入信号的情况下），功放不工作。电路图与TI官网一样
我用的是TAS5630B DKD封装，是根据数据手册提供电路图进行绘制的，只要电路板上电ready引脚就一直为低电平。
您好 ：我的pin3脚电阻是24K。
