Hello,
Use THE AIC3109EVK board + USB-MODEVM board to connect to the computer, select USB MODEVM to play music on the computer, but the headset cannot hear the sound.
LED D2-D5, D7,D8 are all ON。
thx
Gravity
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
Use THE AIC3109EVK board + USB-MODEVM board to connect to the computer, select USB MODEVM to play music on the computer, but the headset cannot hear the sound.
LED D2-D5, D7,D8 are all ON。
thx
Gravity
您好,设备管理器下是否能找到USB-MODEVM?
在安装GUI过程中,是否有安装NI-VISA driver?
https://www.ni.com/en-us/support/downloads/drivers/download.ni-visa.html#346210
您好,在您的GUI界面中,没有AGC gain这个模块呢,看您附的图显示音量最大,我想看下AGC增益是否设置了,如果在0dB的增益,应该是被mute了。
Hi kailyn, 你手上有AIC3109 EVK板子吗?能测试一下吗?因为我刚刚把GUI里面所有mute相关的全部设置了一次,还是不行耶,最后点击execute command buffer,播放音乐还是不行。
您好,抱歉,我手头上暂时没有3109的demo板子,无法复制您的现象,所以想看下GUI的AGC 增益设置。 但是按照您的描述,应该不是增益设置的问题。
方便读取下寄存器,比如读取下Register13,确认下headset是否已经被检测到?
抱歉,回复晚了。我看了下R13,bit7配置的是0,也就是headset检测功能给disable掉了,所以读取bit 6:5也是no detected。
建议将bit 7=1 Headset detection enabled,然后再读取bit6:5,从而是否是由于耳机没有检测到导致没有声音呢。