If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The device has a Fast OVR mode that indicates overload condition
at the ADC input. The input voltage level at which the overload is detected is called the threshold &
is programmable using these bits. The FAST OVR is triggered 7 output clock cycles after the
overload condition occurs. To enable the FAST OVR programmability, enable the register bit<EN
FAST OVR THRESH>. Threshold at which FAST OVR is triggered = 1.9V x [decimal value of FAST
OVR THRESH PROG>]/255. After reset, the default value of <FAST OVR THRESH PROG> is 180
(decimal).
