This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
ads1278使用一周后5v供电脚被拉低到1v多 芯片发热 且不能正常采集 drdy引脚没有跳变 重新上电后正常 5v 3.3v 1.8v供电都是采用ldo供电
我也遇到了同样的问题，采集的压力传感器与金属碰撞时5V那路总会过流。重新上电后正常。
