按照官方的ads1248 4路RTD 做了一个样机,实际安装到热机泵房后模拟开关特别容易坏,损坏的现象是读数不正常,测量没有发现短路和断路,怀疑内部电阻变化了。更换新的模拟开关又便正常。
我使用的PT1000 电流500uA,省略了参考demo的一个二极管,因为压降不够了。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
按照官方的ads1248 4路RTD 做了一个样机,实际安装到热机泵房后模拟开关特别容易坏,损坏的现象是读数不正常,测量没有发现短路和断路,怀疑内部电阻变化了。更换新的模拟开关又便正常。
我使用的PT1000 电流500uA,省略了参考demo的一个二极管,因为压降不够了。