Other Parts Discussed in Thread: ADS4449
在电脑的设备管理器中可以识别到ADS4449,但是归类为其他设备,在High Speed Data Converter Pro软件中无法识别并连接,ADS4449连接了串口线电源线以及tsw1400,不知道是否是因为缺少驱动或者没有连接外部信号和时钟信号?
谢谢
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
在电脑的设备管理器中可以识别到ADS4449,但是归类为其他设备,在High Speed Data Converter Pro软件中无法识别并连接,ADS4449连接了串口线电源线以及tsw1400,不知道是否是因为缺少驱动或者没有连接外部信号和时钟信号?
谢谢
您是按照ADS4449 User Guide (Rev. A)操作的吗?上面有安装步骤和测试过程说明:
ADS4449 User Guide (Rev. A):https://www.ti.com.cn/cn/lit/ug/slau485a/slau485a.pdf
通过datasheet 如下截图可知,输入185MHZ的信号频率,可以使用10Msps~250Msps的采样速率,因此,输入模拟信号频率与输入的采样时钟应该是没有关系的
如果您进行如下ADS4449 User Guide (Rev. A)中的第三部分的测试的话,是需要连接ADS449EVM板的J5 至TSW1400 EVM的 J3 的连接、两个板子的供电、两个板子至PC的USB线、输入模拟信号以及时钟信号,如下截图所示:
所以还是建议您按照ADS4449 User Guide (Rev. A)中的说明从头一步一步操作,在进行到 3.4 部分 ADS4449 and TSW1400 Setup Guide时,这部分提供了TSW1400 User’s Guide (SLWU079A)