• 状态 TI Thinks Resolved
  • 已锁定 已锁定
  • 个回复 1 个回复
  • 答案 1 答案
  • 名订阅用户 11 名订阅用户
  • 次查看 430 次查看
  • 用户 0 名在线用户
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS124S06: low-latency filter 选择是设置为0，还是1

xinfeng huang
Part Number: ADS124S06

ADS124S06数据手册中第9.3.6.1关于低延迟滤波器说明”The low-latency filter is selected when the FILTER bit is set to 0 in the data rate register (04h).“，设置为0则被选择。但是在表30中FILTER位中说明设置为1时则是选择低延迟滤波器。两处是否有矛盾。

  • 0
    TI__Guru**** 185470 points

    您好，

    “The low-latency filter is selected when the FILTER bit is set to 0 in the data rate register (04h).”这里描述有误，应该是FILTER bit is set to 1.

    很抱歉对您造成了困惑，同时也很感谢您指出了这个问题，我们将会在下一版datasheet中修正这一点。