DAC71408: The level of DAC71408

? ??

Part Number: DAC71408

Dear TI engineer,

I have been using LAUNCHXL_F28379D to communicate with DAC71408 and have been having communication problems. May I ask whether the two SPI signals are at the same level? Do I need to add a level switching chip to the circuit?

3 年多前

0 Amy Luo 3 年多前

TI__Guru**** 185470 points

您好，

DAC71408的SPI电平标准是VIO电压，您使用的VIO电压是多少？

您可以看下 LAUNCHXL_F28379D的SPI电平是多少？或者实际测量下其输出的高电平电压看是多少？

LAUNCHXL_F28379D的SPI电平需与DAC71408的SPI电平相兼容，否则的话不能正常通信。

0 ? ?? 3 年多前回复 Amy Luo

Prodigy 20 points

The VIO pin voltage I used is 3.3V, and the CLK pin voltage of LaunchPad measured by oscilloscope is also 3.3V. Is this correct?

+1 Amy Luo 3 年多前回复 ? ??

TI__Guru**** 185470 points

Yes, they can communicate with each other properly if they are all 3.3V. If communication does not work properly, it should be a problem elsewhere

数据转换器

数据转换器论坛

DAC71408: The level of DAC71408