大家好,我用了LMP90100四个差分通道 配置CH0--CH3,现在发现将寄存器配置为通道扫描模式3的时候,CHO-CH3并不是逐次扫描的
结果就是CH0数据采集了5次,CH1可能采集3次,CH可能采集1次,CH3通道还是0次,请问是怎么回事
谢谢。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
请问各位兄弟,为什么LMP90100数据测试不准确,不同的电流输出温度不一样,电流为100uA、200uA时,IB1接的3K电阻上电压为0.3V、0.55V,400uA时电压才0.6V,这是为什么?
我用的STM32F103ZG测试的,感觉配置也没有问题,请各位大哥指点,谢谢!