在实际测量时发现REFIO输出引脚电压为3.8V左右稳定更换了三块芯片发现问题依旧,请问这是器件本身存在问题还是电路设计有问题,电路图如下:,请问能否帮忙找出问题所在,谢谢。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好,
REFIO与FEFGND之间的耦合电容最小4.7uf, R48是焊接的吗?不用C116。
请参考芯片数据手册图 7-7的电路,具体功能描述请参考芯片数据手册“7.3.7.1 Internal Reference”。。
具有可编程双极输入范围的 ADS869x 18 位、高速、单电源、SAR ADC 数据采集系统 datasheet (Rev. B) (ti.com.cn)