通过自己的SPI程序刷写了Flash后,没有进行reset,之后不能进入Display模式,报下面的错误:
进行了如下的尝试,问题没能解决:
1. 在BT下通过上位机刷写BIN文件;(刷写成功,但是进入Standby后不能进入Display,报错同上图)
2. 在standby 模式下通过上位机刷写bin文件。(刷写失败,报错同上图)
出现上述问题应该怎么解决呢?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
通过自己的SPI程序刷写了Flash后,没有进行reset,之后不能进入Display模式,报下面的错误:
进行了如下的尝试,问题没能解决:
1. 在BT下通过上位机刷写BIN文件;(刷写成功,但是进入Standby后不能进入Display,报错同上图)
2. 在standby 模式下通过上位机刷写bin文件。(刷写失败,报错同上图)
出现上述问题应该怎么解决呢?