SFD for IEEE-1588 time stamping in DP83867

feng xu4

Hi,TI engineers。When I Refer to TI Application Report SNLA242 （How to Configure DP83867 SFDs），it is said that Set the internal SFD configuration by writing 0xDF22 to register 0x00E9. But I could not find the register 0x00E9 in the DP83867IRPAP datasheet。 Could you tell me why？Thanks!

9 年多前

0 Kailyn Chen 9 年多前

TI__Guru**** 295050 points

Some of registers are not disclosed, and we could find that the register is 0x00FE after 0X00D3.

0 feng xu4 9 年多前回复 Kailyn Chen

Hi，chen! apperatiated for your reply , if some registers are not disclosed, how could I set sfd configuration, and what do you mean that the register is 0x00FE after 0X00D3?

0 Kailyn Chen 9 年多前回复 feng xu4

TI__Guru**** 295050 points

我的意思是在数据手册上，register map中0x00D3的寄存器之后就是0x00FE，显然还有一部分寄存器disclosed。

关于如何配置0x00E9寄存器，我需要再确认一下。

接口

接口论坛

SFD for IEEE-1588 time stamping in DP83867