• 状态
  • 已锁定 已锁定
  • 回复 1 回复
  • 订户 15 订户
  • 视图 587 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UH940-Q1: DS90UH940调试有毛刺

dana tu
Prodigy 40 points

Part Number: DS90UH940-Q1

DS90UH940的GPIO0控制寄存器0x1D配置为0x3做为input IO；GPIO0外部输入管脚CH1_AUXAudio_SDOUT由FPGA控制，电气配置为output LVCOMS18，

理论上GPIO0高电平希望为1800mv，低电平为0mv，实际测量GPIO0低电平为750mv低不下来(系统上电DS90UB941A与DS90UH940对接，DS90UB941A不发送视频，DS90UH940 GPIO0电平为750mv). 有关寄存器配置有没参考代码？