Other Parts Discussed in Thread: TXB0108
TI工程师您好,我现在有两个应用场景:
一是UART电平转换,1.8V至3.3V;二是增加SPI总线的驱动力。我为了减少BOM上的器件类型,请问是不是可以统一用TX0108RGY来实现呢?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
TI工程师您好,我现在有两个应用场景:
一是UART电平转换,1.8V至3.3V;二是增加SPI总线的驱动力。我为了减少BOM上的器件类型,请问是不是可以统一用TX0108RGY来实现呢?