This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] INA240:输出拉电流和灌电流规格

Guru**** 2771175 points

Other Parts Discussed in Thread: INA240

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/826301/ina240-output-source-and-sink-current-specs

器件型号:INA240
主题中讨论的其他器件:LMV822

您好!

我没有看到 ina240的输出拉电流和灌电流规格。  我现在正在查看原理图、我看到客户使用缓冲器(LMV822)来驱动 ADC、而不仅仅是 INA240。  我需要知道我是否需要使用缓冲器来驱动 ADC 输入。  ADC 为 ADS8166IRHB。

开尔文

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、开尔文、

    此信息可在以下输出电流与电压间的关系曲线中找到。

    此致、Guang