This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] LM311:识别1号引脚的位置时出现问题

Guru**** 1818760 points
Other Parts Discussed in Thread: LM311
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1279963/lm311-problem-with-recognize-where-pin-number-1-is

器件型号:LM311

您好!

我们向您购买了 LM311、我如何识别引脚1的位置? 在数据表中、 外壳上有一个点或陷波、但在图片上没有。

此致、

马尔辛·奇霍姆斯基

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 Marcin:

    如 Clemens 所示、引脚1位于左下角、如您的图片所示。 引脚4是右下角、引脚5是右上角、引脚8是左上角。

    将来、我们将仅移动到引脚1点、如引脚1指示灯图形的第一个框中所示。