This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1489415/am2634-am2634-reset-reason
工具与软件：
你(们)好
AM2634芯片的 r5fss0-0内核复位为 Watchdog 0。 为什么要从如下所示的寄存器中读取值67？ 它应该是66。 请告诉我、此寄存器等于67的值意味着什么？
这可能是因为之前存在的0x41值(即复位值)、而 WDT0也导致0x42被加入。 您能否在读取此值之前尝试清除 WARM_RST_CASE 寄存器(通过将0x7写入 WARM_RST_CAUSE_CLR)？
