This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1518285/mspm0c1104-mspm0c1104---zero-code-studio
工具/软件：
您好、在 Zero Code Studio 中无法像 GPIO27一样看到任何输出切换
在 LaunchPad 上、PA27连接到 J101上的 TXD 引脚、因此您应该移除该跳线。
非常感谢！ (下次我更好地查看原理图) 现在、我们开始使用8引脚 DFN 器件。 (刚刚制作了编程适配器)
