This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] UNIFLASH:启动 UniFlash 时出现错误提示

Guru**** 2538950 points
Other Parts Discussed in Thread: UNIFLASH

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1234285/uniflash-error-prompt-when-launching-uniflash

器件型号:UNIFLASH

尊敬的社区:

我已安装"uniflash_sl.8.3.0.4307.exe"

我将其安装到的目标文件夹为"C:\Program Files (Misc)\ti\uniflash_8.3.0"。

我没有将任何硬件或外围设备连接到计算机。 我在尝试启动该程序时立即收到错误消息。

有人可以帮助我解决以下错误吗?

"加载扩展时出错"从 C:\Program.加载扩展时失败。 清单文件丢失或无法读取。"

谢谢!

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好!

    问题似乎是 UniFlash 快捷方式未将其中一条路径包含在引号中。 因此、它无法处理 UniFlash 安装在带有空格的目录中的情况。

    您可以 编辑快捷方式并将有问题的路径用引号引起来、如下所示:

    这将解决该问题。

    我也为此提交了一个错误。 跟踪链接: https://sir.ext.ti.com/jira/browse/EXT_EP-11166

    谢谢

    小标题