This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPA3128D2:故障引脚应用

Guru**** 2413430 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/audio-group/audio/f/audio-forum/696491/tpa3128d2-fault-pin-application

器件型号:TPA3128D2

是否可以将故障直接连接到 SDZ?

还是应将100K 拉高至 GVDD? 10K 至 GND?  

谢谢!

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    0Hi Ray、

    SDZ 引脚可连接到 FAULT 引脚、并通过100k Ω 电阻上拉至高电压、以实现自动恢复模式。

    此致、

    郑少文