请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:CC2564MODAEM 大家好、
是否有方法可以测量和控制模块的功耗以及如何设置射频 TX 功率?
谢谢你。
-Mark
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
大家好、
是否有方法可以测量和控制模块的功耗以及如何设置射频 TX 功率?
谢谢你。
-Mark
Mark、您好!
要测量功耗、请参阅 《CC2564MODAEM 用户指南》的第8.2.1.2节。 要设置射频 Tx 功率、您可以使用 HCI 命令: HCI_VS_DRPb_SET_Power_Vector (0xFD82)(位于随附的特定版本 HCI 用户指南中)。
谢谢、
Jacob
e2e.ti.com/.../7750.CC256x-VS-HCI-Commands-_2D00_-Texas-Instruments-Wiki.pdf