This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TMS320F28388D:关于 F28388 EtherCAT 状态显示错误问题

Guru**** 2589275 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1124840/tms320f28388d-about-f28388-ethercat-status-display-error-problem

器件型号:TMS320F28388D

大家好、

以下是客户提出的问题、可能需要您的帮助:

对不起、F28388+KSZ8081实现了 EtherCAT、可以正常通信。 如图所示、它处于 OP 状态、但 TwinCAT 接口显示端口0的状态显示它未连接。 为什么?

谢谢、此致

耶鲁李

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    问题已经解决。 接线问题。