请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TMS320C28346 你(们)好
我读出 DS 表示 GPIO12-57上的上拉电阻在复位时启用、我想知道上拉电阻器的值是多少?
如果有人可以提供 此值、则以分钟典型值表示。 和最大值 这将非常有帮助。
谢谢
戴维·H.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
你(们)好
我读出 DS 表示 GPIO12-57上的上拉电阻在复位时启用、我想知道上拉电阻器的值是多少?
如果有人可以提供 此值、则以分钟典型值表示。 和最大值 这将非常有帮助。
谢谢
戴维·H.
David、
这些不是电阻器、它们在电路中处于活动状态。 https://e2e.ti.com/support/microcontrollers/c2000/f/c2000-microcontrollers-forum/102249/tms320f28335-gpio-internal-pull-up-pull-down-resistor-values/359175#359175
在该器件上、拉强度在数据表的电气特性表7.6 ( -190至-100uA)中指示。
此致、
Cody