This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] CCS/AWR1243:AWR1243级联毫米波传感器#39;s 角度测量方法

Guru**** 3020190 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/910193/ccs-awr1243-awr1243-cascade-mmwave-sensor-s-angle-measurement-method

器件型号:AWR1243

工具/软件:Code Composer Studio

我们已经知道、在水平方向上、通过在86个虚拟通道上执行2D-FFT 来获得方位角。 但是、在仰角方向、四根天线的间隔不相等、并且无法从 FFT 的峰值位置估算仰角。 应使用什么方法来估算仰角? 希望推荐一些、谢谢。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

     尊敬的用户6248842:  

    仰角天线采用最小冗余线性阵列配置进行间隔。 我建议查找有关最小冗余阵列的 DoA 处理的文献。  

    谢谢、

    -Randy