This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] CCS/J6EVM5777:OpenCV +(硬件/ TI / dra7xx /摄像头)

Guru**** 2039030 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/796832/ccs-j6evm5777-opencv-hardware-ti-dra7xx-camera

器件型号:J6EVM5777

工具/软件:Code Composer Studio

您好 TI

我将在我的项目中执行对象检测,如照片中所示:



我的解决方案是在 cameraHAL 中使用 OpenCV。
实际上、我使用了摄像机 HAL (硬件/ TI / dra7xx /摄像机)。
我的问题:
如何在 AOSP 上集成 OpenCV?
此解决方案是否可行?

此致
ALA

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    请提供任何帮助。
  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    你(们)好
    OpenCV 不随 TI 摄像头驱动程序一起试用。
    请尝试使用 VISION SDK (TI 推荐用于 TDA2x/DRA7x 的软件开发套件)
    可从 www.ti.com/.../processor-sdk-tdax 下载

    此致、Shiju