Other Parts Discussed in Thread: ADC3910S025
工具/软件:
VCM 输出的输出阻抗/电流驱动能力是多少?
我假设我可以忽略 SPI 接口、将其硬件复位、并在其默认模式下将其用作普通的 10 位并行 ADC。 音频正常吗?
如果是、10 个数据位出现在哪里? 有 12 个引脚、即 D0 到 D11。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Other Parts Discussed in Thread: ADC3910S025
工具/软件:
VCM 输出的输出阻抗/电流驱动能力是多少?
我假设我可以忽略 SPI 接口、将其硬件复位、并在其默认模式下将其用作普通的 10 位并行 ADC。 音频正常吗?
如果是、10 个数据位出现在哪里? 有 12 个引脚、即 D0 到 D11。
您好、John:
任何 ADC 上的 VCM 输出驱动强度都不是很好。 如果您计划将 VCM 输出连接到靠近的放大器、那么您应该没问题。
否则、使用跟随器缓冲器来保持稳定的电压。 我会在 VCM 输出端、ADC 附近以及放大器输入 VOCM 引脚附近放置一个 0.1uF 电容器。
即 10 位与 12 位。 MSB 对齐并使用 D11 向下……前 10 个输出位。
此致、
Rob