主题中讨论的其他器件: ADC3441
1.每次加电时 adc3444芯片是否都必须复位,我们 是否必须重新配置上次配置的寄存器值?
2. 我不知道我是否按以下顺序进行配置、对吧? 加电或复位后、我们 首先 按照 表8中所述配置寄存器、
然后、我们 根据需要配置寄存器。
3、 所有上述 寄存器 都已配置 、因此我们可以 使用转换值。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.