请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:DDC2256A 您好!
我正在使用此器件、并且能够在命令 ADC 输出预定义图形(全零、全一、斜坡等)时查看数据。
当我尝试收集实际实时数据时、我看不到数据发生变化。 它看起来相当随机、但数据始终与 ADC 实际没有输出任何内容相同。
要查看 ADC 的"实时"数据、最低寄存器设置是什么? 谢谢。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好、Michael、
由于器件 DDC2256A 在 NDA 下共享、因此我们 希望使此对话脱机。
我请求您向我们发送电子邮件至邮寄名单: ddcxxx-support@list.ti.com 、我们将通过电子邮件为您提供支持。
请在电子邮件中分享您的寄存器配置和测试设置详细信息。