请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:ADS7827 主题中讨论的其他器件: ADS7826
ADS7827的散热焊盘是否应该悬空?
将散热焊盘连接到 GND 是否会以任何方式损坏器件?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好 Darren、
建议将散热焊盘焊接到 PCB 上、以帮助提高机械稳定性。 因此、您可以将散热焊盘连接到 GND。 它不会损坏器件。 我在 这里链接了一篇有关使用 ADS7826的类似主题的 E2E 文章。
此致、
Aaron Estrada