请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:ADS1013-Q1 您好、TI 团队
我的客户希望将 ADS1013-Q1用作单端输入。
1、将 AIN1连接到 GND。
在电压电平下、分辨率为0V 至2.048V (对于12位)、在 AD 值下为2048至4095。
(差速器箱的一半范围)
这种认可是否正确?
此致、
高志林
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好、TI 团队
我的客户希望将 ADS1013-Q1用作单端输入。
1、将 AIN1连接到 GND。
在电压电平下、分辨率为0V 至2.048V (对于12位)、在 AD 值下为2048至4095。
(差速器箱的一半范围)
这种认可是否正确?
此致、
高志林