器件型号:AMC3336
我正在尝试读取使用 AMC3336的音频放大器的交流扬声器输出。 交流电压可达到250V +/-、因此我使用 AMC3336进行隔离。
我是否可以使用 AMC1210将 PDM 信号转换为 PCM、通过 I2S 发送到 ESP32以进行进一步处理?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.