This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] DAC53401-Q1:如何通过 DAC53401-Q1输出方波

Guru**** 2460850 points
Other Parts Discussed in Thread: DAC53401

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1390703/dac53401-q1-how-to-output-square-wave-from-dac53401-q1

器件型号:DAC53401-Q1
Thread 中讨论的其他器件:DAC53401

工具与软件:

I2C通信でDAC53401からの矩形波出力を設定する手順を教えてください。μ A

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好!

    方波输出固定为50%占空比、频率由以下公式设置:

     

    方波模式和压摆率可在 GENERAL_CONFIG 寄存器中设置:

    方波的高低电平在 MARGIN_HIGH 和 MARGIN_LOW 寄存器中设置:

    然后、在 TRIGGER 寄存器中开始函数生成:

    此致!

    Katlynne Jones