This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TLIN1029-Q1:上拉电阻限制

Guru**** 2933120 points

Other Parts Discussed in Thread: TLIN1029-Q1

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1586902/tlin1029-q1-pull-up-resistance-limitation

器件型号: TLIN1029-Q1

您好、专家:

我是否可以知道 TLIN1029-Q1 上拉电阻是否存在限制? 当我们使用 10k Ω 或 30k Ω 时、这是否会对通信产生任何影响? 非常感谢!

此致、

Ann Lien

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好:Ann、

    我们的 LIN 收发器已为响应者节点应用集成了一个 45K Ω 上拉电阻、因此无需添加外部上拉电阻。

    对于指挥官节点应用、LIN 标准需要 1K Ω、以确保足够快的上升沿。 没有理由使用其他值电阻器。

    此致、

    Sean