This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/663175/tusb1002-layout-routing-impedance-design-question
你(们)好
根据TUSB1002设计指南，建议使用90欧姆的3.1 Gen2高速差分迹线阻抗，
但根据英特尔指南，建议在80欧姆时使用哪种阻抗 进行PCB设计？
谢谢你
