请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TPS65982DMC 您好、先生、
我的客户需要在待机模式下将其坞站产品断电至0.5W。 他们测试其系统、并看到 TPS65982DMC 在其电路板上花费了0.5W (在移除 DMC 的3.3V 电源后)。
982DMC 在一般情况下花费0.5W 是否正常?
2.客户可以使用 GPIO 控制关闭982DMC 吗?
感谢你的善意帮助。
此致、
程介南
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好、先生、
我的客户需要在待机模式下将其坞站产品断电至0.5W。 他们测试其系统、并看到 TPS65982DMC 在其电路板上花费了0.5W (在移除 DMC 的3.3V 电源后)。
982DMC 在一般情况下花费0.5W 是否正常?
2.客户可以使用 GPIO 控制关闭982DMC 吗?
感谢你的善意帮助。
此致、
程介南