This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TCAN334:STB 和 SHDN 引脚都保持高电平

Guru**** 2502205 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1036400/tcan334-stb-and-shdn-pins-both-held-high

器件型号:TCAN334

您好!

您能否确认 、如果 STB 和 SHDN 引脚都保持高电平、 TCAN334D 将进入 关断模式?

谢谢、Keith  

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    Keith、

    正确、在这两种模式下、CAN 总线驱动器和主接收器都被禁用。 关断和待机的区别在于关断、唤醒接收器也被禁用。 STB 和 SHDN 均保持高电平、器件将处于关断模式。

    此致、

    Eric Hackett