This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] DP83822I:PHY 无法连接

Guru**** 2864540 points

Other Parts Discussed in Thread: DP83822I

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/991603/dp83822i-phy-can-not-link

器件型号:DP83822I

你(们)好

dp83822的配置模式为 MII 100 MB 半双工。 当程序从应用层跳转到引导时、PHY 将不会链接。 如果下拉芯片复位引脚以直接在应用中复位芯片、则 PHY 也不会发生链路。

附件是 链路失败且链路成功时读取的 PHY 寄存器值。  您有调试提示吗?

e2e.ti.com/.../4722.phyreg.txt